Features
Bare Knuckle Riff Raff Humbucker Pickups - Calibrated Nickel Covered Set
The Bare Knuckle Riff Raff Humbucker Pickups - Calibrated Nickel Covered Set is based on the shorter rough cast Alnico V PAFs of 1960, with a more symmetrical wind of 42 AWG plain enamel wire providing more focus in the upper-mids and brighter highs. While the same build standard and components of the other vintage humbuckers in the range apply, the Riff Raff delivers a more aggressive vintage tone and unmistakable rock voice. The bottom-end is deep but very controlled and coupled with the extra cut in the high-end, allow for plenty of snap and a classic range of organic, clean and driven tones.
Although voiced as a vintage rock humbucker, hard rock and metal players will enjoy the punchy and focused tone when used with hi-gain rigs. This is a Calibrated set with 4 Conductor Wiring, with a Bridge Spacing of 50mm, and 1/2" Long Leg Screws. Wound, made and played the traditional way-by hand.
Bare Knuckle Riff Raff Humbucker Pickups - Calibrated Nickel Covered Set Technical Specifications
Bridge Spacing: 50mm
Conductor: 4
Leg Length: Long (1/2")
Coil: Potted
Cover: Nickel
DC: Bridge 8.2K, Neck 7.4K *
Magnet: Alnico V
Wiring: 4 Conductor 
Covers: Nickel
Tone:
Tight and punchy bass response with a smooth
bite in the high-end define the voice of early
'60s humbucker-driven rock'n'roll.
Guitar Types:
All solid-body and semi-acoustic guitars especially
double cut and single cut, glued neck styles or any
guitar that would benefit from a brighter, punchier
r'n'r voice. Also works very well on baritone guitars.
Applications:
Blues, Funk, Indie, Reggae, Britpop,
Garage, Punk, Alternative, Classic
Rock, Heavy Rock,'80s Metal.
Sound Clips:
RIff Raff - Clean
Riff Raff - Classic Rock
Riff Raff - Modern Metal
|
